Kia Windshield Replacement Colonial Heights VA

🪟

Glass Types Used in Kia

Acoustic Laminated

Standard on most Kia models from 2020+ — acoustic PVB for noise reduction.

Rain Sensor

Drive Wise equipped models (Sportage, Sorento, Telluride) require rain sensor glass.

Forward Collision Warning Camera

Most Kia models with Drive Wise have a forward-facing camera requiring post-replacement calibration.

360-Degree Camera

Telluride, Sorento, and Sportage have 360-degree camera systems — all cameras need recalibration.

📷

ADAS & Camera Systems

Forward Collision-Avoidance Assist (FCA)

Camera on most 2019+ Kia models — calibration required after windshield replacement. Included in our standard service.

Lane Keep Assist

Most models with Drive Wise have lane keeping cameras that need post-replacement calibration.

Blind Spot Collision Warning

Some Kia models have side-mounted cameras for blind spot monitoring — requires calibration.

⚠️ Common Kia Windshield Considerations

!Telluride and Sorento's 360-degree camera system requires calibration of all four cameras — many shops lack the correct equipment.
!Kia's UV-blocking glass must be correctly specified by VIN — incorrect glass can cause dashboard display issues.
!Telluride with rear seat entertainment has different rear glass specifications.

📡

ADAS Calibration After Kia Windshield Replacement

Kia Highway Driving Assist ADAS calibration page (Richmond metro) →

ADAS Calibration FAQ for Kia

Clear answers about when calibration applies and how we verify the correct procedure for your vehicle.

When is ADAS calibration required after a Kia windshield replacement?

Calibration depends on Kia's service information and the exact year, make, model, and VIN. It may be required when a forward camera or related sensor is disturbed by glass replacement; we verify the requirement before work and do not add calibration when the manufacturer does not call for it.

How is ADAS calibration performed and documented?

Depending on the vehicle, calibration uses static target-board measurements, a dynamic road procedure, or both. We follow the manufacturer's sequence with the required targets and diagnostic software, then document the procedure and results for your records.

Why do manufacturer-specific ADAS systems and procedures matter?

Glass fit, camera geometry, target placement, diagnostic software, and calibration sequence vary by manufacturer and model. Following the correct manufacturer procedure helps confirm the camera is aligned and the safety system is ready to operate as designed.

Request a quote and we’ll verify your VIN, year, make, and model before any work begins.

Request a Quote →